Instructions for Label Packs

INSTRUCTIONS: HOW TO USE OUR LABELS?

You may check out this video for instructions on how to apply iron on labels.

    IRON ON STICKERS (White Rectangular Stickers enclosed in a separate packing )

    1. Peel off the sticker from the backing paper and place it on the garment.
    2. Set iron on to “dry” mode, temp. 130-170 degrees (middle or wool setting).
    3. Holding iron fiat, press the name sticker in place for 10-15 seconds.

    DO NOT move the iron around.

    1. Allow the garment to cool down.
    2. Repeat steps 2 and 3 again (total of 3 pressings and cooling).
    3. Use a thin pressing cloth on delicate fabrics.

      NOTE: Iron on labels are very easy to apply with a home iron. Exact instructions will be enclosed in the package ordered.

     

    WATERPROOF STICKERS (Small Rectangular Stickers)

    1. Peel off the sticker from the backing paper.
    2. stick it on the article of choice and leave it for 24 hours before using them

     

    SHOE STICKERS

    1. Peel off the sticker from the backing paper.
    2. Add a few drops of super glue (like fevikwik) to the back of the sticker and paste it on the insole of the shoe.
    3. Don't wear the footwear for 24 Hours.